Bubble Humidifier, Salter Labs 7900 for various Oxygen Concentrators

Salter High Flow Bubble Humidifier Bottle (Tan Lid) for Various Oxygen Concentrators

With an ingenious pressure relief valve and down spout diffuser, Salter's Tan Lid 7900 Bubble Humidifier Bottle provides effective, comfortable humidification for oxygen users with high flows of 6-15 LPM. As with all Salter Bubble Humidifiers, the 7900 Bubble Humidifier Bottle is safe and easy to use, maximizing humidification while ensuring quiet operation and lowering system back pressure.

Salter Tan Lid High Flow Bubble Humidifiers feature 360° molded diffuser ports, at the bottom of the internal humidifier tube, to increase overall humidity and reduce noise during use. Large, permanently etched maximum/minimum water level markings on the transparent bottle; and an easy to grip quad wing nut connector add user friendly touches to this premium bottle design.

The 7900 Bubble Humidifier Bottle has a 6 PSI Audible Pop-off Pressure Alarm to warn of any obstructions to oxygen flow and help reduce the likelyhood of concentrator damage due to downstream occlusion.

Usage Information: Use sterile distilled water whenever possible to reduce the possibility of contamination and scaling. If using distilled water, remove the humidifier bottle every 7 days, wash with mild soap and water and rinse thoroughly. If using boiled tap water, remove the humidifier bottle every 3 days, wash with mild soap and water, rinse thoroughly, and allow to air dry. If the humidifier shows scaling, damage or wear and tear, replace immediately. For complete instructions review the documentation that came with your equipment.